The sealing unit for tubes Tube 50 is a very sturdy table-top unit for manual closing of plastic tubes designed for small series, making samples or for use in laboratories.
Suitable for tubes made of PP, PA/PE and others.
- 4 - 6 tubes per cycle
- adjustable tube length (hand wheel)
- temperature control of sealing bar
- combined permanent and impulse heating for best sealing results
- electronic control of sealing and cooling time
- 9 programs can be memorized
The optimum sealing temperature, sealing and cooling time can be adjusted. By means of a hand wheel the sealing head is brought on a suitable height to close the tubes. The filled tubes are put in the holder and already automatically formed. Sealing procedure is started by hand gear. At the end of the cycle the holder can be taken out of the unit - the tubes are closed.
Length of tube (Verstellbereich)
70mm to 230mm
Standard holder (1)
20mm, 25mm, 30mm,
35mm, 40mm, 50mm
Capacity of each holder
Cap diameter up to 40mm: for 6 tubes
Cap diameter up to 50mm: for 6 tubes
1 = other diameters on request
Tubes for cosmetics, care products, animal care products, pharmaceutics, lotions, etc.